How I Painted My Kitchen Cabinets

One of the main things that our home needed the most was an update for the kitchen.  We had the honey oak cabinets, old hardware, honey oak floor, and a huge ugly lighting box that dropped the ceiling a good 6 inches (at least).  It also needs some new counter-tops but... that is a project for another time.  The flooring has been changed (that will be the next post!)

So I decided to take on painting and antiquing the cabinets.  Although it was a TON of work... I think it was worth it. I love how they turned out and it really brightened up our space.

Our cabinets were in really good condition, they were just... not my favorite color! Especially since the floors were the same color-  see the before picture in all it's glory below:  Can you see the awesome light fixture??

 The first thing I did was wash everything- I cleaned the drawers, cabinet doors, the cabinets themselves, just all of it.  These cabinets are 20 years old so they needed it.

Then I took all of the hardware and cabinet doors off.

I lightly sanded everything- this is the part I got my hubby to help because I h.a.t.e. sanding.  It actually really didn't take too long.  We sanded about 30-60 sec. per cabinet door.

While sanding was getting finished up, I put plastic down and taped all around the cabinets- the ceiling, the floors, and any walls that were touching the cabinets.  I ran out of good tape so I used this cream tape... Not a good idea! Just buy the good stuff! It's worth it :)

Can you see all of the sticky notes on each drawer and cabinet door?  This is telling me where each one goes so it would all fit right and be easy when I went to put it back together (Which, at this point, was hours and days away).  If you ever do this, I highly recommend labeling the doors and drawers.  It helped for sure.


After the sanding was done, the painting began!  I got paint with primer in it to save some work-  I ended up putting 3 coats of antique white Behr paint on.  In hindsight, I probably only really needed to do two but sometimes I can be a perfectionist and this was one of those times.   Here's what it looked like when it was painted.  I was really tempted to leave it white because it just looked so clean!

Once the paint had dried, it was time to antique!!  This part terrified me... mostly because the antique goes on like.... super dark.  This is the antique glaze I used:

It's pretty easy to do- I just brushed it on with a foam brush (.30 cents at the hardware store) and then I went right behind with old t-shirts and wiped it all off.  I had to be really careful that I wiped it all off the same so there's not streaks or parts that are way darker than other.  Once you wipe it away you are left with a cool oldish look.  To see what I mean- take a look:

With and without the glaze

The antiquing part gave me a work out for sure, but it gave it character and I love how it turned out.  After I antiqued it, I put a top clear coat to protect everything, added some new oil-rubbed bronze hardware, and it was done!!!! We worked on it on the weekends and nights after work and it ended up taking about 2 weeks.  

Here's the finished product!!

Now fast forward to last April--we re-did our flooring and here's the kitchen now!

DIY Turquoise Headboard: Easy & Budget Friendly!

I made this simple headboard based on an idea I saw HERE. I saw this picture and could not find the original post anywhere, so I just winged it.

This cost me less than $10 and didn't take long at all. (I already had some of the basics- sand paper, top coat, antique glaze).  The longest part was just waiting for the paint to dry.

I went to Home Depot and bought a sample of turquoise paint and 4 pieces of wood- you can do any size you want really.  In fact you could probably pallet wood which is a great idea I didn't think of when I made this.

              

I sanded the wood down so it was smooth and then I put 2 coats of paint on the boards.  After the paint dried I applied an antique glaze.  I had some on hand already because I used the glaze on my kitchen cabinets (which I will post about later).

With and without the antique glaze

Once that dried, I put on a clear coat and was done!  I just needed to hang them up.

I tried using command strips and they did not work well for me. I have textured walls so that is probably why I don't know.  It could have been a user error also.

We had family come over around the holidays and one of the boards fell off in the night and hit my brother in law in the head..... So..... After that incident I decided I should probably use something a little more sturdy.

I just used screws- put 1 on each ends of the boards and called it good!  So far no one else has been a victim of the middle-of-the-night-head-board-attack!

Here's the finished product:

Our Home! Before & After

We got this home a few years back and have re-done just about everything!  This is just the very beginning... the first month's worth of work!

Do It Yourself projects have become my hobby thanks to this fixer upper.  Here are a couple before and after shots-  What a difference a coat of paint and some carpet can make!!

Living Room Before

Living Room After

Formal Living Room Before

Formal Living Room After

Stairs Before

Stairs After- The Picture does not do this justice!
The carpet was soo nasty!

Formal Dining Room Before

Formal Dining Room After

Master Bedroom Before

Master Bedroom After

Bedroom Before

Bedroom After

Yeah... it was a lot of work! Grateful for wonderful family!

How we probably all felt most of the time